Few Key Instructions of BMC RESmart GII Auto CPAP with Humidifier & Hose:
This device, BMC RESmart GII Auto CPAP with Humidifier & Hose should only be used with the mask and accessories manufactured or recommended by BMC or with those prescribed by your physician. The use of any other masks and accessories may affect the device’s performance and may even have an affect on therapy effectiveness.
If you suffer from chest discomfort, shortness of breath, stomach bloating, or severe headache when using BMC RESmart GII Auto CPAP machine, contact your physician or qualified medical personnel immediately
Keep BMC RESmart GII Auto CPAP machine and the oxygen container away from heat, open flames, any oily substances, or other sources of ignition. DO NOT smoke in the area near G2S A20 / G2S C20 or the oxygen container.
Regular cleaning of the device and its accessories are very important for the prevention of respiratory infections
To avoid data loss or any damage to the SD card, the SD card can only be removed after the device stops delivering air.
When you pull out the water chamber, do not touch the heating plate to avoid getting burned.
QR Code information is available by simply rotating the knob on the device - Scan the code on the RESmart GII Auto CPAP - Click NEXT - You will access the ’Show Report’ interface - You can choose a simple or full report from 1 day to 1 year - You can also send your report to your homecare provider.
If RESmart GII Auto CPAP is transferred to another patient, components in close contact with the previous owner, including the mask, headgear, tube, and air filter, should be replaced to prevent cross-infection
Buy BMC RESmart GII Auto CPAP with Humidifier In Jaipur At Dealer Prices From Innerpeace.
System Features of BMC RESmart GII Auto CPAP with Humidifier & Hose:
Humidifier Indicator: Indicate the humidity level. There are five levels in total. The number of indicator lights that light up is directly proportional to the humidity level. If the indicator lights are off, it means the humidifier is turned off
Mute Button: Press this button to mute the alert. However, if the problem causing the alert is not solved, the alert will sound again two minutes later
Knob: Start treatment and adjust device settings
Ramp Button: Enable the Ramp feature
Display Screen Display menus for operation, messages, monitoring data, etc.
Power Indicator: Indicates the power supply status
SD Card Slot: Insert the SD card into this slot
Air Outlet: Deliver pressurized air; connects to the tube
Communications Port: Connected to external equipment (Not for connection to un-recommended devices)
DC Inlet: An inlet for the DC power supply
Filter Cap (Air Inlet): Place the cap on the air filter, which is used to filter dust and pollen in the air entering the device